Solar DC to AC Hybrid Inverter 350W-40KW Factory
350W DC12V/24V
500W/600W/700W/1000W DC12V/24V/48V
1200W DC24V
1500W DC24V/48V
2000W/3000W DC24V/48V/96V
2500W DC24V/48V
3500W/4000W DC48V/96V
5000W/6000W DC48V/96V/192V
7KW/8KW/10KW/12KW DC96V/192V
15KW DC192V
20KW/25KW DC220V
30KW DC240V
40KW 384V
Output Voltage: AC110V/120V/220V/230V/240V
Frequency: 50Hz/60Hz
Wave Form: Pure Sine Wave
Solar Controller: MPPT/PWM Built-in Solar Inverter
AC Charger: 6A-15A
Can Be Customized for Special Power and Voltage and Appearance
- Description
- Inquiry
Description
⌈Solar Inverter Introduction⌋
1. Pure sine wave output.
2. Wide AC voltage input range, AVR output.
3. Adopt traditional EI transformer , stable performance.
4. LCD/LED&LCD real-time display, concise and straightforward.
5. Working modes: AC first or battery first optional, intelligent charging.
6. Built-in PWM charge controller optional.
7. RS232 communication port optional.
⌈Solar Inverter Models⌋
⌈Solar Inverter How to Use⌋
Here I introduce two common working modes of inverter:
AC priority mode — When the grid electricity is normal (in line with the grid electricity input voltage range of the inverter), the grid electricity supply stable AC output; when the grid electricity is abnormal ( The grid electricity exceeds the working range of the inverter or the grid electricity supply is interrupted), the inverter will be powered by the battery. Note: Under AC priority mode, both grid electricity and solar energy can charge the battery.
Battery priority mode — When the battery is fully charged (Like single-cell battery voltage is up to 13.2VDC), the inverter will work under the battery mode even if the AC input is normal; When single-cell battery voltage is lower than 11VDC, but the AC input is normal, at this time, the inverter will switch to the AC mode .
⌈Solar Inverter Installation⌋
⌈Solar Inverter Parameters⌋
Specification | |||||||||||||||
Model NB | 35112/24 | 50112/24/48 | 60112/24/48 | 70124/48 | 70112 | 10212/24/48 | 12224 | 15224/48 | 20248 | 20224/96 | 25224/48 | 30224/48/96 | 35248/96 | 40248/96 | |
Rated Power | 350W | 500W | 600W | 700W | 700W | 1000W | 1200W | 1500W | 2000W | 2000W | 2500W | 3000W | 3500W | 4000W | |
Peak Power(20ms) | 1050VA | 1500VA | 1800VA | 2100W | 2100VA | 3000VA | 3600VA | 4500VA | 6000VA | 6000VA | 7500VA | 9000VA | 10500VA | 12000W | |
Start Motor | 0.3HP | 0.5HP | 0.5HP | 0.5HP | 0.5HP | 1HP | 1HP | 1.5HP | 2HP | 2HP | 3HP | 3HP | 3HP | 3HP | |
Battery Voltage | 12/24VDC | 12/24/48VDC | 24/48VDC | 12VDC | 12/24/48VDC | 24VDC | 24/48VDC | 48VDC | 24/96VDC | 24/48VDC | 24/48/96VDC | 48/96VDC | 48/96VDC | ||
Inside Solar controller(Optional) | 10A~30A(PWM) | 10A~60A(PWM 12V/24V/48V) | |||||||||||||
Size(L*W*Hmm) | 335*210*122 | 410*143*210 | 400*180*320 | 420*208*348 | 460*245*445 | ||||||||||
Packing Size(L*W*Hmm) | 385*270*185(1pc) / 400*280*400(2pcs) | 460*200*270(1pc) / 475*425*285(2pcs) | 460*240*380 | 490*300*400 | 530*310*550 | ||||||||||
N.W.(kg) | 6.5 | 8 | 9 | 10 | 11 | 13 | 14 | 18 | 21 | 23 | 25 | 29 | 31 | 46 | |
G.W.(kg)(Carton Packing) | 7.5 | 9 | 10 | 11 | 12 | 14 | 15 | 19 | 22 | 24 | 26 | 30 | 32 | 48 | |
Installation Method | Desktop | Tower | |||||||||||||
Model NB | 50248/96/192 | 60248/96/192 | 70296/192 | 80396/192 | 10396/192 | 12396/192 | 153192 | 203220 | 253220 | 303240 | 403384 | ||||
Rated Power | 5000W | 6000W | 7000W | 8KW | 10KW | 12KW | 15KW | 20KW | 25KW | 30KW | 40KW | ||||
Peak Power(20ms) | 15000VA | 18000VA | 21000VA | 24KVA | 30KVA | 36KVA | 45KVA | 60KVA | 75KVA | 90KVA | 120KVA | ||||
Start Motor | 4HP | 4HP | 5HP | 6HP | 7HP | 7HP | 10HP | 10HP | 15HP | 15HP | 20HP | ||||
Battery Voltage | 48/96/192VDC | 96/192VDC | 96/192VDC | 96/192VDC | 96/192VDC | 192VDC | 220VDC | 220VDC | 240VDC | 384VDC | |||||
Inside Solar controller(Optional) | 10A~60A(PWM 12V/24V/48V) | 50A/100A(PWM) | 50A/100A/150A/200A(PWM) | ||||||||||||
Size(L*W*Hmm) | 460*245*445 | 485*300*646 | 600*300*800 | 720*435*1120 | |||||||||||
Packing Size(L*W*Hmm) | 530*310*550 | 550*365*785 | 665*365*830 | 790*505*1260 | |||||||||||
N.W.(kg) | 52 | 53 | 62 | 64 | 66 | 70 | 108 | 113 | 119 | 135 | 160 | ||||
G.W.(kg)(Wooden Packing) | 58 | 59 | 72 | 74 | 77 | 80 | 121 | 130 | 136 | 150 | 180 | ||||
Installation Method | Tower |
<< Slide left for more parameters
Parameter | |||||||||||||||
Input | DC Input Voltage Range | 10.5-15VDC(Single battery voltage) | |||||||||||||
AC Input Voltage Range | 700W~7000W: 73VAC~138VAC(110VAC) / 83VAC~148VAC(120VAC) / 145VAC~275VAC(220VAC) / 155VAC~285VAC(230VAC) / 165VAC~295VAC( 240VAC) 8KW~40KW: 92VAC~128VAC(110VAC) / 102VAC~138VAC(120VAC) / 185VAC~255VAC(220VAC) / 195VAC~265VAC(230VAC) / 205VAC~275VAC( 240VAC) | ||||||||||||||
AC Input Frequency Range | 45Hz~55Hz(50Hz) / 55Hz~65Hz(60Hz) | ||||||||||||||
Max AC charging current | 6A~15A(Depending on the model) | ||||||||||||||
AC charging voltage | LEAD battery:Charge Voltage :14.2V; Float Voltage:13.8V(Single battery voltage) | ||||||||||||||
AC charging method | Three-stage (constant current, constant voltage, floating charge) | ||||||||||||||
Output | Efficiency(Battery Mode) | ≥85% | |||||||||||||
Output Voltage(Battery Mode) | 110VAC±2% / 120VAC±2% / 220VAC±2% / 230VAC±2% / 240VAC±2% | ||||||||||||||
Output Frequency(Battery Mode) | 50Hz±0.5 or 60Hz±0.5 | ||||||||||||||
Output Wave(Battery Mode) | Pure Sine Wave | ||||||||||||||
Efficiency(AC Mode) | >99% | ||||||||||||||
Output Voltage(AC Mode) | Follow input | ||||||||||||||
Output Frequency(AC Mode) | Tracking Automatically | ||||||||||||||
Output waveform distortion (Battery Mode) | ≤3%(Linear load) | ||||||||||||||
No load loss(Battery Mode) | ≤2.5% rated power(Models below 7KW);≤1% rated power(models above 7KW) | ||||||||||||||
No load loss(AC Mode) | ≤2% rated power( charger does not work in AC mode) | ||||||||||||||
No load loss(Energy saving Mode) | ≤10W | ||||||||||||||
Battery Type | VRLA Battery | Charge Voltage :14.2V; Float Voltage:13.8V(Single battery voltage) | |||||||||||||
Customize battery | Charge and discharge parameters of different types of batteries (such as lithium batteries, etc.) can be customized according to user requirements | ||||||||||||||
Protection | Battery undervoltage alarm | Factory default: 11V(Single battery voltage) | |||||||||||||
Battery undervoltage protection | Factory default: 10.5V(Single battery voltage) | ||||||||||||||
Battery overvoltage alarm | Factory default: 15V(Single battery voltage) | ||||||||||||||
Battery overvoltage protection | Factory default: :17V(Single battery voltage) | ||||||||||||||
Battery overvoltage recovery voltage | Factory default: 14.5V(Single battery voltage) | ||||||||||||||
Overload power protection | Automatic protection (battery mode), circuit breaker or insurance (AC mode) | ||||||||||||||
Inverter output short circuit protection | Automatic protection (battery mode), circuit breaker or insurance (AC mode) | ||||||||||||||
Temperature protection | >90°C(Shut down output) | ||||||||||||||
Alarm | A | Normal working condition, buzzer has no alarm sound | |||||||||||||
B | Buzzer sounds 4 times per second when battery failure, voltage abnormality, overload protection | ||||||||||||||
C | When the machine is turned on for the first time, the buzzer will prompt 5 when the machine is normal | ||||||||||||||
Inside Solar controller (Optional) | Charging Mode | PWM | |||||||||||||
Charging current | 12V/24V/48V System: 10A/20A/30A/40A/50A/60A; 96V/192V/240V/384 System: 50A/100A/150A/200A | ||||||||||||||
PV Input Voltage Range | 15V-44V(12V System); 30V-44V(24V System); 60V-88V(48V System); 120V-176V(96V System); 240V-352V(192V System); 300V-440V(240V System); 480V-704V(384V System) | ||||||||||||||
Max PV Input Voltage(Voc) (At the lowest temperature) | 50V(12V/24V System); 100V(48V System); 200V(96V System); 400V(192V System); 500V(240V System); 750V(384V System) | ||||||||||||||
PV Array Maximum Power | 12V System: 140W(10A)/280W(20A)/420W(30A)/560W(40A)/700W(50A)/840W(60A); 24V System: 280W(10A)/560W(20A)/840W(30A)/1120W(40A)/1400W(50A)/1680W(60A); 48V System: 560W(10A)/1120W(20A)/1680W(30A)/2240W(40A)/2800W(50A)/3360W(60A); 96V System: 5.6KW(50A)/11.2KW(100A) ; 192V System: 11.2KW(50A)/22.4KW(100A); 220V System: 12.8KW(50A)/25.6KW(100A); 240V System: 14KW(50A)/28KW(100A)/21KW*2(150A)/28KW*2(200A); 384V System: 22.4KW(50A)/44.8KW(100A)/33.6KW*2(150A)/44.8KW*2(200A) | ||||||||||||||
Standby loss | ≤3W | ||||||||||||||
Maximum conversion efficiency | >95% | ||||||||||||||
Working Mode | Battery First/AC First/Saving Energy Mode | ||||||||||||||
Transfer Time | ≤4ms | ||||||||||||||
Display | LCD | ||||||||||||||
Thermal method | Cooling fan in intelligent control | ||||||||||||||
Communication | RS232(Optional) | ||||||||||||||
Environment | Operating temperature | -10℃~40℃ | |||||||||||||
Storage temperature | -15℃~60℃ | ||||||||||||||
Noise | ≤55dB | ||||||||||||||
Elevation | 2000m(More than derating) | ||||||||||||||
Humidity | 0%~95% ,No condensation | ||||||||||||||
Note: All specifications are subject to charge without prior notice |
⌈Why Choose Xindunpower⌋
⌈About Xindunpower – Solar Inverter Manufacturer⌋
⌈Solar Inverter Factory Scene⌋
⌈Our Certificate⌋
⌈Global Solar Power Expo⌋
If you are interested in this NB series solar inverter, please feel free to contact us through the contact information below.
Xindun is a solar power factory in China, now we are looking for sales agents all over the world, wating for you to join us.