48V 100Ah Lifepo4 Battery Pack
Buy 48v 100ah lifepo4 battery pack to uk and get the best deals at the lowest prices on Xindunpower.com. Small volume and light weight lifepo4 pack applies to all kinds of back-up source products.
- Description
- Inquiry
Description
Xindunpower 48V 100Ah lifepo4 battery pack to uk is small volume, light weight, which applies to back-up source products.
⌈Product Specifications⌋
| 48V 100Ah Lifepo4 Battery Pack Specifications | ||
| Cell | Capacity（0.5C） | 50Ah |
| rated voltage（V） | 3.2V | |
| Typical Impedance (mΩ) | ≤1 mΩ | |
| Battery material | LiFePO4 | |
| PACK | Combination method | 2P15S |
| Minimal capacity（0.5C） | 100Ah | |
| Nominal voltage | 48V | |
| Max. charge voltage | 55V | |
| Discharge cut-off voltage | 40V | |
| Max Charge current | (1C)100A | |
| Max Working current | (1C)100A | |
| Standard charge current | (0.2C)20A | |
| Standard discharge current | (0.5C)50A | |
| Pack Impedance standard | ≤100 mΩ | |
| Weight (Approx.) | ≈56Kg | |
| Max. dimension（L×W×H）(mm) | ≤420*482*222 | |
| Charge temperature | 0℃～45℃ | |
| Discharge temperature | -20℃～55℃ | |
| BMS(Battery Management System) | Single cell over-charge cut-off voltage | 3.7V |
| over-charge release voltage | 3.35V | |
| Single cell under-discharge cut-off voltage | 2.5V | |
| Discharge release voltage | 2.7V | |
| Over-discharge cut-off current | 80A | |
| Over-discharge cut-off current delay | 1S±0.5S | |
| Short-circuit protection | 150A | |
| Short-circuit protection delay | ≤1mS | |
| Condition for the recovery of over-current and Short-circuit | Charge release | |
| Balance current | 50mA | |
| Balance Condition | ≥3.5V,Differential pressure 50mV | |
| Communication procotol | RS485/RS232/CAN | |
⌈Precautions for Lifepo4 Battery Pack Use⌋
- If the cell is stored for a long time(exceed three months), the cell should be stored in drying and cooling place. The cell should be charged and discharged each six months.
- Prior to charging, the battery shall be discharged at 20 °C ± 5 °C at a constant current of 0,5 C,down to the specified end-of-discharge voltage. Unless otherwise stated, the battery shall be charged at constant current 0.2 C to (3.65*N)V, then maintain at (3.65*N)V until the current down to 0.02 C.
- Do not dismantle, open or shred the batteries.
- Do not expose batteries to heat or fire. Avoid storage in direct sun light.
- Do not short-circuit the battery, Do not store batteries haphazardly in a box or drawer where they may be short-circuited by other metal objects.
- Forbid confusedly using the charge socket and discharge socket, or accidents may occurred.
- Do not subject batteries to mechanical shock.
- Keep batteries clean and dry.
- When possible, remove the battery from the equipment when not in use.
⌈Schematic Diagram of the Lifepo4 Battery Pack Connection⌋
⌈Lifepo4 Battery Pack Performance Curves⌋
⌈About Xindunpower – Lifepo4 Battery Pack Supplier⌋
⌈Factory Scene⌋
⌈Global Photovoltaic Exhibition⌋
